Differences between MMS CLASSIC and CDSplus

There are 3 development stages of chlorine dioxide products.

1st level:
The first stage with a bottle of 25% sodium chlorite and a bottle of 5% HCl activator solution corresponds to our MMS CLASSIC. Here, only the desired amount can be activated dropwise and a fresh chlorine dioxide solution is always obtained. This solution, however, is pH-acidic

2nd level:
The second stage is the ready-for-use CDS / CDL solutions by the distillation process. These are pH neutral, but also only limited in storage and shelf life. Because of the constantly falling concentration one must always dose higher, this is very impractical. Therefore, we do not have a ready-for-use CDS / CDL product from the second stage.

3rd level:
The third level corresponds to our patented CDSplus. Here you have the combination of the advantages of both previous stages. When not activated, the CDSplus is durable for years. If necessary, an entire bottle of CDSplus is activated with the activator tablet and this solution is then stored in the refrigerator for 6-9 months. The CDSplus also produces a pH-neutral chlorine dioxide solution and is the only product to be 100% chlorine free after activation. This leads to a considerably better compatibility.

ATTENTION: There are some very similar sounding products from other market participants, but they do not have the same characteristics as the original: Our No3 CDSplus of the brand AQUARIUS pro life. For the same amount of water much more CDSplus than MMS CLASSIC is required. In hot countries with limited cooling capability, the MMS CLASSIC may be preferable.

< Start page